MAG set-top boxes work differently from Android TV, Fire TV, Samsung Smart TV, and LG Smart TV.
Instead of installing an IPTV application, MAG devices connect directly to an IPTV portal. You enter the portal address in the MAG box’s portal settings, and the device loads the IPTV service through that portal.
For Xtreme HD IPTV, the MAG portal address provided for this setup is:
MAG Portal URL
Important: MAG boxes identify and authenticate the device through the service’s portal system. If your service requires your MAG device to be registered first, provide the device’s MAC address to your IPTV provider/support team.
Infomir’s documentation confirms that an external portal URL can be manually configured through System settings → Servers → Portals.
What You Need
Before starting, make sure you have:
- A compatible MAG set-top box
- Your TV connected to the MAG box
- Internet connection
- MAG remote control
- Your MAG device’s MAC address
- Active Xtreme HD IPTV service
- The Xtreme HD IPTV portal URL
Portal URL
A wired Ethernet connection is recommended when available because it can provide a more stable network connection.
Step 1: Connect Your MAG Box
Connect the MAG box to your television using the appropriate HDMI connection.
Then connect the MAG box to the internet.
You can normally use:
- Ethernet
- Wi-Fi, if supported by your MAG model
Turn on the MAG box and wait for the initial screen to appear.
Step 2: Find Your MAG MAC Address
Your MAG device has a unique MAC address that may be required by your IPTV provider to associate the device with your subscription.
Depending on your MAG model/software version, you can usually find device information through the system settings.
Look for:
Settings → System Settings → Device Info
or a similar System Information section.
Your MAC address will look similar to:
00:1A:79:XX:XX:XX
Do not confuse the MAC address with the portal URL.
Important
If Xtreme HD IPTV requires MAC registration for your subscription, send the MAC address exactly as displayed on the device to support before attempting to log in.
Step 3: Open System Settings
From the MAG main screen:
- Open Settings.
- Select System Settings.
- Select Servers.
- Select Portals.
On some older MAG remotes, the settings button may be labeled SET, Setup, or Services. Infomir documents these alternative access methods for different MAG software/remote configurations.
Step 4: Configure Portal 1
Inside Portals, you should see fields similar to:
Portal 1 Name
Portal 1 URL
Enter a name in the portal name field.
For example:
Xtreme HD IPTV
Then enter the following in Portal 1 URL:
Make sure you enter the address exactly as provided.
Do not add spaces before or after the URL.
Infomir specifies that an external portal URL is entered in the URL field under the Portals settings.
Step 5: Save the Portal Settings
After entering the information:
Portal Name: Xtreme HD IPTV
Portal URL: http://kytv.xyz/portalstb
Save the settings.
Depending on the MAG model and software version, you may need to press OK or use the on-screen save command.
Step 6: Restart the Portal
After saving the portal address, go back to:
System Settings → Restart Portal
Select Restart Portal.
The MAG device should now attempt to connect to:
Infomir’s documentation specifically describes restarting the portal after configuring an external portal so that the specified portal can load.
Step 7: Wait for the Xtreme HD IPTV Portal to Load
After restarting the portal, you should see a loading message.
Allow the MAG box some time to connect.
If your device has been correctly registered and the portal is available, the IPTV interface should load.
Depending on the service, you may see sections such as:
- Live TV
- Movies
- Series
- Favorites
- TV Guide / EPG
- Search
The exact interface depends on the IPTV portal and service configuration.
Does a MAG Box Use a Username and Password?
MAG devices can work differently from app-based IPTV players.
With many MAG portal setups, the device’s MAC address is associated with the IPTV account, rather than entering a username and password into an app.
Infomir explains that external portals can also include an authentication stage where a provider supplies a login and password, so the exact authentication method depends on the IPTV platform.
For this reason, if the portal loads but asks for additional credentials, use the credentials supplied with your Xtreme HD IPTV subscription.
MAG Portal Settings Summary
Use the following settings:
| Setting | Value |
|---|---|
| Portal Name | Xtreme HD IPTV |
| Portal URL | http://kytv.xyz/portalstb |
| Portal | Portal 1 |
| Connection | Ethernet or supported Wi-Fi |
| Authentication | According to your subscription |
| MAC Address | Your MAG device MAC |
How to Check the MAG MAC Address
If support asks for your MAC address:
- Open Settings.
- Open System Settings.
- Find Device Info, System Info, or the equivalent information screen.
- Locate the MAC address.
- Send the complete MAC address to your IPTV provider/support.
You can also check the label on some MAG devices, depending on the model.
MAG Box Says “Page Loading Error”
If you see a Page Loading Error, check the following.
1. Check the Portal URL
Make sure the URL is exactly:
Check for:
- Missing characters
- Extra spaces
- Incorrect spelling
- Incorrect
http:// - Incorrect path
2. Check Your Internet Connection
Go to the MAG network settings and make sure the device has an active network connection.
If possible, use Ethernet.
3. Restart the MAG Box
Restart the portal first.
If that doesn’t help, completely reboot the MAG device and try again.
4. Check MAC Registration
If the IPTV service uses MAC-based activation, the device may need to be registered with the provider before the portal can deliver your service.
Verify that the correct MAC address was supplied.
MAG Box Loads the Portal but Shows No Channels
If the portal opens successfully but you don’t see your IPTV content:
- Check that your subscription is active.
- Confirm that your MAG MAC address is registered correctly.
- Restart the portal.
- Reboot the MAG box.
- Check the internet connection.
- Contact your IPTV provider/support team.
The MAG manufacturer notes that the device itself does not supply IPTV content; the external portal and IPTV operator provide the service.
MAG Box Keeps Disconnecting
If the portal repeatedly disconnects:
Use Ethernet
A wired connection can provide a more consistent network connection.
Restart Your Router
Restart your router and allow the internet connection to return before restarting the MAG box.
Check Your Network
Test another device on the same network.
Check the IPTV Service
If other internet services work normally but the IPTV portal repeatedly disconnects, contact your IPTV provider.
How to Change the MAG Portal
If you need to replace an existing portal:
- Open System Settings.
- Select Servers.
- Select Portals.
- Select the portal you want to edit.
- Replace the existing URL.
- Enter the new portal URL.
- Save the settings.
- Select Restart Portal.
Infomir supports multiple external portal entries on supported MAG software, and its documentation describes configuring Portal 1, Portal 2, and additional portals through multiportal mode.
MAG Portal Not Loading After Restart?
If the box continues loading an old portal, check whether DHCP Portal is enabled.
Infomir explains that a DHCP-supplied portal can take priority over portal addresses configured manually in the device settings.
Check:
System Settings → Servers → More
and review the DHCP portal configuration if it is enabled.
If your network administrator or IPTV provider has configured a DHCP portal, that may be why the manually entered portal isn’t being used.
Recommended MAG Connection
For the best possible network stability:
Ethernet
Connect the MAG box directly to your router with an Ethernet cable when possible.
Wi-Fi
If your MAG model supports Wi-Fi, use a strong wireless connection and keep the device within good range of the router.
Xtreme HD IPTV MAG Setup – Quick Version
If you already have an active subscription, the basic setup is:
1. Connect MAG Box
Connect the MAG device to your TV and internet.
2. Open Settings
Go to:
Settings → System Settings → Servers → Portals
3. Enter Portal Name
Xtreme HD IPTV
4. Enter Portal URL
5. Save
Press OK or select the save option.
6. Restart Portal
Go to:
System Settings → Restart Portal
7. Wait
Allow the Xtreme HD IPTV portal to load.
If your MAG MAC address must be registered, make sure it has been associated with your subscription before expecting the service to appear.
What About Other MAG Models?
The menu names can vary slightly between MAG models and software versions.
The general configuration remains:
System Settings → Servers → Portals → Portal URL → Save → Restart Portal
Infomir’s documentation covers external portal configuration across its MAG software ecosystem, although specific menu layouts can differ by model/software version.
Xtreme HD IPTV Subscription
If you already have an Xtreme HD IPTV subscription, use the portal information provided for your account.
For the MAG setup described in this guide:
Portal URL: http://kytv.xyz/portalstb
If you don’t have an active subscription yet, visit Xtreme HD IPTV and select an appropriate plan.
30% OFF First Purchase
Use coupon code:
SAVE30
to receive 30% OFF your first purchase, where applicable.
Frequently Asked Questions
What portal URL do I use for Xtreme HD IPTV on MAG?
For this setup, use:
Enter it under the Portal 1 URL field.
Does MAG use an IPTV app?
No. MAG devices use their built-in portal system rather than installing an IPTV application like an Android TV device.
Do I need to provide my MAC address?
If your IPTV service uses MAC-based activation, yes. The provider may need to associate your MAG device with your subscription before the portal can provide content.
Where do I enter the portal URL?
Go to:
Settings → System Settings → Servers → Portals → Portal 1 URL
Then save the settings and restart the portal.
What if my MAG box says Page Loading Error?
Check the portal URL, internet connection, MAC registration, and network settings. Then restart the portal.
Can I use Wi-Fi?
That depends on your particular MAG model. Ethernet is recommended when available for a stable connection.
Why does my old portal keep loading?
Check whether a DHCP portal is configured. Infomir notes that a DHCP portal can take priority over manually configured portal addresses.
Final MAG Setup Checklist
☑ MAG box connected to TV
☑ Internet connection working
☑ MAC address available
☑ MAC registered if required
☑ Open System Settings
☑ Open Servers → Portals
☑ Portal Name: Xtreme HD IPTV
☑ Portal URL: http://kytv.xyz/portalstb
☑ Save settings
☑ Restart Portal
☑ Wait for the portal to load
☑ Contact support if the portal does not authenticate
Important: MAG hardware and portal software are access tools. Make sure the television channels, movies, series, and other content accessed through the service are properly authorized or licensed for your location.
